The device of the heating and ventilation system Parts of the heating and ventilation system 1 - bracket, 2 - pollen filter, 3 - body, 4 - windshield blower nozzles, 5 - nozzles for blowing side windows, 6 - front nozzles, 7 -...
Ventilation nozzles Removing the air supply nozzle on the side windows 1. Using pliers, pulling up, remove the air supply nozzles to the side windows from the instrument panel. 2. To remove the...
Heater control panel Heater block 1 - heater radiator, 2 - screw, 3 - air distribution box, 4 - switching valve actuator "fresh/recycled air", 5 - screw, 6 - heater fan, 7 - heater fan casing, 8 -...
Central damper lever Installing the central damper lever There is a timing mark on the gear wheel of the central damper lever. The lever must be installed in such a way that the mark on the lever...
Heater control unit Heater control unit 1 - housing of the heater control unit, 2 - backlight, 3 - side rotary handles, 4 - central rotary handle, 5 - decorative overlay of the heater control panel...
Heater resistor block Removing 1. Remove the lower instrument panel trim on the passenger side. 2. Disconnect the electrical connector from the resistor block. 3. Unscrew the block of resistors and...
Heater and air conditioner control unit Removing 1. Remove the decorative panel of the heater and air conditioner control unit. To do this, using a screwdriver with a thin blade, wring out the latches located at the...
Air conditioning compressor Warning: Do not open the refrigerant circuit of the air conditioning system. Avoid skin contact with refrigerant. Warning: The A/C compressor, together with the bracket, can be...
Heater fan Location of heater fan mounting screws 1 - electrical connector, 2 - fan casing Removing 1. Remove the lower instrument panel trim on the passenger side. 2. Disconnect the...