Trunk lid upholstery

Elements of fastening of an emergency stop sign

• 1 - cover,
• 2 - latch,
• 3 - emergency stop sign

Arrangement of elements of fastening of an upholstery of a cover of a luggage carrier on models the Sedan

• 1 - screws,
• 2 - upholstery of the trunk lid,
• 3 - handles,
• 4 - plastic nuts

Removing

1. Unscrew the clamp that secures the warning triangle cover, see fig. Elements of fastening of a sign of an emergency stop.

2. Open the cover and remove the warning triangle.



3. unscrew the screws (arrows), then pull the top part to remove the holder (1) emergency stop sign.


4. Unscrew 13 screws located on perimeter of an upholstery of a cover of a luggage carrier and remove an upholstery of a cover of a luggage carrier together with handles, see fig. Arrangement of elements of fastening of an upholstery of a cover of a luggage carrier on the Sedan models.

Installation

1. Check the condition of the plastic nuts in the trunk lid and, if necessary, replace them.

2. Reinstall the trunk lid trim, align the screw holes, and secure the trim with the screws.

3. Install the warning triangle holder and secure it with screws.

4. Install the warning triangle in the holder, close the cover and secure it with the retainer.