Warning: The brake fluid used in the hydraulic clutch system is poisonous, so if it comes into contact with the skin, immediately wash the area with plenty of water. If the liquid gets into the eyes or inside the body, you should immediately consult a doctor. Some fluids tend to be highly flammable and can ignite even from contact with hot vehicle components. In addition, the fluid used in the hydraulic clutch system dissolves paint and plastic, so if fluid comes into contact with the car's paintwork, wash it with plenty of water. Also, this liquid is hygroscopic, i.e. it absorbs moisture from the air and, therefore, it is not recommended to use liquid stored for a long time in an open container.
Order of execution
1. Check that the brake fluid level in the transparent reservoir is between the MIN and MAX marks.
2. If it is necessary to add brake fluid, first wipe the area around the filler cap and unscrew the cap from the brake fluid reservoir.
3. Check the cleanliness of the reservoir, and if necessary, drain the brake fluid and clean the reservoir.
4. Add brake fluid up to the MAX mark on the reservoir. Use only the prescribed brake fluid as mixing of brake fluids is not permitted.
Visitor comments