In case of frost, before turning on the windshield wipers for the first time in a trip, you should check if the brushes are frozen!
In the presence of heated windshield washer jets, the activation and automatic regulation of the intensity of heating occurs from the moment the ignition is turned on, depending on the ambient temperature.
Windshield
Switching off the wipers
Steering column switch in fixed position O.
Intermittent brush movement
Steering column switch in fixed position 1.
Switch A can be used to set 4 different brush intervals.
Switch to the right - shortened pauses between operation.
Switch to the left - extended pauses between operation.
Additionally, the duration of pauses in each position is automatically adjusted depending on the speed of the vehicle.
Slow brush movement
Steering column switch in fixed position 2.
Fast brush movement
Steering column switch in fixed position 3.
Manual control of brush movement (start-stop mode)
Steering column switch in fixed position 4.
Automatic cleaning and washing
Raise the steering column switch to the steering wheel (5) – Windshield wipers and washer are working.
Release the stalk switch - the washer stops, the wipers work for about 4 seconds.
Rear glass (station wagon)
Intermittent brush movement
Steering column switch in fixed position 6.
The windshield wiper operates every 6 seconds.
Automatic cleaning and washing
Paddle shift fully away from steering wheel (7) – The windshield wiper and washer operate as long as the switch is held down.
Release the stalk switch - the washer stops, the wiper works for about 4 seconds.
Headlight washer
When the high beam or low beam is on, each time the windshield washer is switched on, the surfaces of the headlight lenses are also washed.
Visitor comments