The composition of the coolant mixture

The content of antifreeze in the coolant must not exceed 60%, which corresponds to frost protection down to -40°C, otherwise the protective and cooling properties of the coolant will decrease.

Warning: It is not recommended to use the previously used mixture of antifreeze and anti-corrosion agent G11, which is green in color.

Warning: Do not mix G11 and G12 Anti-Corrosion Agents as serious engine damage may result.

If the cooling system was filled with coolant that is not recommended by the manufacturer, drain it from the cooling system. Fill the cooling system with clean water and run the engine at idle speed for 2 minutes. Drain the water from the cooling system and blow out the engine cooling system with compressed air through the expansion tank. Fill with fresh coolant recommended by the manufacturer.