General information about manual transmission The gearbox converts the torque transmitted from the engine in magnitude and direction. This is necessary to ensure optimal speed and maneuverability of the vehicle, as well as...
Removing the gearbox To remove the gearbox, raise the vehicle and secure it in this position. It is also necessary to use a stationary jack. Order of execution 1. Remove the ground wire from the...
Installing the gearbox The location and tightening torques of the gearbox mounting bolts on models with a four-cylinder engine Position Bolt Tightening torque 1 М12х75 65 Nm 2 М12х110 65 Nm 3 М12х90 65...
Gearbox repair The gearbox is a very complex unit and its repair must be carried out in a specialized workshop. Also, when removing and installing many parts, it is necessary to measure the gaps...
Dedicated automatic transmission Location of electrical connectors (A, B, C, D) and staples (E), securing the wiring harness to the gearbox Torque converter mounting nut, visible through the starter mounting hole...
Fully automatic transmission Passat cars are equipped with four- or five-speed fully automatic transmissions. The automatic transmission consists of a torque converter, a planetary gear, and hydraulic and...
Shift Cable Adjustment for Fully Automatic Transmission Automatic transmission control cable 1 - ball mount of the cable, 2 - gear selection lever, 3 - bolt, 25 Nm, 4 - cable fastening nut, 10 Nm Examination 1. Raise the car and secure...