Removing
Switch off the ignition and all electrical consumers and turn the key to position 0 (pre-stop).
Remove the hood latch.
Unlock and disconnect plug connection 2.
Pic. 7.93. Plug connection and cable holder for hood contact switch
Unlock wire holder 1 (pic. 7.93).
Cut 2 the wire banding device.
Pic. 7.94. Latch release
Unlock latch 1 and move the hood contact switch in the holes so that the switch can be removed (pic. 7.94).
Installation
Installation is carried out in the reverse order.
Visitor comments