Attention: Observe the safety precautions when working on the airbag.
Note: When removing and installing items that are in sight (switches, covers, trim panels, etc.), seal the places of application of the tool, wedge, screwdriver, etc., with ordinary adhesive tape.
Removing
Switch off the ignition and all electrical consumers and turn the key to position 0 (pre-stop).
Pic. 7.100. Panel in front console
Carefully pry panel 1 with a wedge at the clips (pic. 7.100).
Pic. 7.101. Connector for front passenger airbag warning lamp
Unlock the plug connection and disconnect the plug (pic. 7.101).
Unlock the front passenger airbag warning lamp and remove the lamp from the panel.
Installation
Installation is carried out in the reverse order.
Visitor comments