Note: The parking light bulb left and the parking light bulb right can be checked using the final control diagnosis of the onboard power supply control unit.
Removing
Switch off the ignition and all electrical consumers and turn the key to position 0 (pre-stop).
Note: The illustrations show the replacement of the parking light bulb on the right headlight.
Note: The left parking light bulb and the right parking light bulb are replaced in the same way.
Pic. 7.56. protective cap
Remove protective cap 1 (pic. 7.56).
Pic. 7.57. lamp holder
Remove, as far as the length of the wires allows, socket 1 with parking light lamp from the reflector (pic. 7.57).
Pic. 7.58. Removing the Lamp
Remove parking light bulb 2 in the direction of the arrow from socket 1 (pic. 7.58).
Installation
Installation is carried out in the reverse order, paying attention to the following.
Note: When installing, pay attention to the tight fixation of the cap. If water gets inside the headlight, the headlight may be damaged.
Note: When installing the lamp, do not touch the glass surface of the lamp. Fingerprints leave greasy prints on the lamp glass, which evaporate after switching on the headlights, and the light of the lamp may dim.
Check the operation of the headlight, including all its functions.
Check the headlight setting and adjust if necessary.
Visitor comments