Removal and installation of the oil pallet Removing Remove the crankcase protection. Unbolt the front intake pipe from the exhaust manifold. Pic. 2.55. 3 pin plug Disconnect the 3-pin plug from the oil level and...
Removal and installation of the oil pump Removing Remove the oil pan. Hold the oil pump sprocket with a wrench to secure it. Pic. 2.56. Loosening the sprocket. Loosen the sprocket bolt (pic. 2.56). Note: Do not...
Removal and installation of elements of the cooling system Pic. 2.61. Elements of the cooling system installed on the body: 1 – a hose of a cooling liquid, top; 2 – O-ring; 3 - radiator; 4 - cover; 5 - plug; 6 - bolt 5 Nm; 7 - expansion...
Draining and filling the coolant Pic. 2.62. Cooling system hose connection diagram: 1 - expansion tank; 2 – a hose of system of cooling; 3 – EGR valve with EGR potentiometer; 4 - heater heat exchanger; 5 -...
Removal and installation of a radiator Removing Bring the radiator frame to the service position. Drain the coolant. Disconnect the cooling system hoses from the radiator. Disconnect the plug from the thermal switch...
Removal and installation of the water pump Due to the modification of the water pump belt pulley mounting bolts, three roundings must be filed on the tool and at least a = 1 mm must be removed. Pic. 2.65. Bolt loosener...