Pic. 3.83. Components of the automatic transmission shift mechanism: 1 - case with a handle; 2 – gearbox control lever with selector; 3 - screw with a spring; 4 - pins; 5 - locking bracket; 6 - nut; 7 - switch housing; 8 - selector cable; 9 - hex nut with washer
Attention: Before carrying out work with the engine running, move the selector lever to the position «P» and apply the parking brake.
Note: After installation, it is necessary to check and adjust the easy movement of the cable.
Removing
Remove the center console.
Disconnect the cable from the gearbox.
Remove the parts of the exhaust system under the heat shield.
Remove the heat shield under the vehicle.
Unscrew the 4 upper nuts of the gearbox control lever.
Nut tightening torque: 8 Nm
After installation, check the cable.
Visitor comments