Removing
1. Remove the air filter.
2. Remove the top part of the timing belt cover.
3. Remove the cylinder head cover.
4. Disconnect the fuel lines from the injection pump.
5. Seal the channels with tissue.
6. Disconnect the wiring connector (arrow) from the injection pump and disconnect the connector from the bracket (rice. 7.19).
7. Turn off bolts 1 fastenings of a pulley of TNVD (rice. 7.14).
8. Turn off bolts 1 fastenings of an arm (pic. 7.46).
9. Unscrew the rear support bolt (arrow) (pic. 7.47).
10. Remove the injection pump.
Installation
11. Installation is carried out in the reverse order of removal.
Visitor comments