Removing
Disconnect ground wire from battery (-).
Attention: Follow the instructions given in chapter «Removing and installing the battery».
Remove airbag assembly from steering wheel.
Remove steering wheel.
Remove steering wheel switches.
Remove instrument panel.
Remove upper A-pillar trim see relevant chapter below.
Remove center console see relevant chapter.
Remove the storage boxes on the right and left, see relevant chapter.
Remove glove box, see relevant chapter below.
Car with phone: Unscrew the phone holder from the dashboard.
Remove the side covers on the right and left, see the respective chapter.
Unscrew 2 screws -arrows-, detach fuse holder -1- from dashboard and push inward.
Remove the light switch on the left.
Remove side air vents.
Remove the overlay of the console of the radio / heating control unit, see relevant chapter above.
Remove 4 screws -arrows- in recess for radio/heating control unit.
Disconnect the airbag connector on the passenger side next to the driver.
Caution: When disconnecting wires, follow the safety instructions for handling air bag.
Remove 2 screws -arrows- and remove airbag assembly. In doing so, do not remove bracket -1- for airbag.
Unscrew the fastening to the dashboard of the diagnostic connector and lay it down.
Unscrew securing screws -arrows- on both sides and remove dashboard with help of a second person.
Installation
Installation is carried out in reverse order.
Visitor comments