Wheels and tires. general information VW POLO/SEAT IBIZA cars, depending on the model and equipment, are supplied with wheels of various sizes. If tires and / or rims are installed that are not indicated in the...
Tire inflation pressure The tire inflation pressure is set by the vehicle manufacturer depending on various parameters. These parameters include, among others, the loading of the vehicle and its maximum...
Designations of tires and disk wheels / date of manufacture Tire designation example 195 - tire width in mm. /70 - ratio of height to width (tire cross-sectional height is 70% of the width). If there is no special indication of the ratio...
Wheel balancing Serially produced wheels are balanced at the factory. Balancing is necessary in order to compensate for the uneven distribution of mass and inaccuracies in the material for the...
Changing wheels / keeping the direction of rotation It is impractical to change the direction of rotation of the tires when changing the wheels, since the tires adapt to the changed direction of rotation only when they are heavily...
Removal and installation of a wheel Removing Note: The light alloy rims are protected against corrosion with a clear lacquer. When changing wheels, take care not to damage the protective layer, otherwise the...
Anti-skid chains Snow chains may only be used on the front wheels. Before mounting, remove the wheel covers that cover the entire rim to prevent damage. After removing the snow chains, install the...
Tire care In general, it is believed that tires, figuratively speaking, have «memory», and rough handling of them - such is considered, respectively, a quick or frequent collision with a...
Incorrect tire wear First of all, it is necessary to ensure that the tire pressure is within the specified value, and it is necessary to check the tire pressure at least once every 4 weeks, and also...