Removing
Loosen the Phillips screws from the lamp lens until they come out of the thread (do not turn completely). Remove the diffuser together with the frame and seal.
Lightly press and turn to the left to remove the lamp.
Installation
Purpose of lamps:
- at the top - direction indicator;
- in the middle - brake light / side light;
- at the bottom is a reversing light.
Install the lamp so that the two protrusions on the base fit into the grooves of the socket.
Attention! The brake light bulb has two different protrusions on the base, so it can only be inserted into the socket in one position.
Slightly push the bulb in and turn to the right.
Visitor comments