Vehicle maintenance Volkswagen Caddy 3
Disconnecting and connecting terminals from the battery
Detachment To ensure safety when working on the electrical system, it is necessary to remove the negative terminal from the battery. Remove the positive battery terminal only when...
Detachment To ensure safety when working on the electrical system, it is necessary to remove the negative terminal from the battery. Remove the positive battery terminal only when...
Removing and installing the battery
Cars with petrol engines Removing To remove the battery, follow these steps. 1. Disconnect the terminals from the battery. 2. Move up (arrow) remove the wall of the battery box....
Cars with petrol engines Removing To remove the battery, follow these steps. 1. Disconnect the terminals from the battery. 2. Move up (arrow) remove the wall of the battery box....
Brake Fluid Replacement
Attention! Never mix brake fluid with fluids containing mineral oils (oil, gasoline, cleaners). Mineral oils damage the seals and seals of the brake system. Brake fluid is...
Attention! Never mix brake fluid with fluids containing mineral oils (oil, gasoline, cleaners). Mineral oils damage the seals and seals of the brake system. Brake fluid is...
Changing engine oil and oil filter
Draining or pumping out engine oil On engines with a vertical oil filter, the oil filter must be changed before changing the oil. When the filter element is removed, the bypass...
Draining or pumping out engine oil On engines with a vertical oil filter, the oil filter must be changed before changing the oil. When the filter element is removed, the bypass...
Removal and installation of the protective pallet of a motor compartment
To remove the protective tray of the engine compartment, perform the following steps. Removing 1. Remove the screws (arrows). 2. Detach the protective tray from the bumper cover...
To remove the protective tray of the engine compartment, perform the following steps. Removing 1. Remove the screws (arrows). 2. Detach the protective tray from the bumper cover...
Removal and installation of the top casing of the engine
4-cylinder petrol engine with letter BCA (1.4 l, gasoline, 55 kW, 75 hp) Removing To remove the upper engine cover, follow these steps: 1. Disconnect the hose connecting the air...
4-cylinder petrol engine with letter BCA (1.4 l, gasoline, 55 kW, 75 hp) Removing To remove the upper engine cover, follow these steps: 1. Disconnect the hose connecting the air...
Replacing the fuel filter in a diesel engine
To replace the fuel filter, follow these steps. 1. Unscrew the plug of the water pumping hole (1). 2. Connect the hose of the condensate drain tank to the fitting. 3. Use a hand...
To replace the fuel filter, follow these steps. 1. Unscrew the plug of the water pumping hole (1). 2. Connect the hose of the condensate drain tank to the fitting. 3. Use a hand...
Replacing the air filter element
Removal and installation of the air filter element on engines with the letter designation BCA (1.4 l, gasoline, 55 kW, 75 hp until 05.2006) For fastening the upper part of the air...
Removal and installation of the air filter element on engines with the letter designation BCA (1.4 l, gasoline, 55 kW, 75 hp until 05.2006) For fastening the upper part of the air...
Checking the camshaft timing belt (4-cyl. gasoline engines)
1. Remove the toothed belt guard. 2. To check up a gear belt for absence of the defects shown on fig. VC 1.062. VC 1.062: A. Scratches, transverse fractures, cracks (from the side...
1. Remove the toothed belt guard. 2. To check up a gear belt for absence of the defects shown on fig. VC 1.062. VC 1.062: A. Scratches, transverse fractures, cracks (from the side...
Checking the camshaft timing belt (SDI and TDI diesels)
1. Unfasten the latches of the upper casing of the toothed belt and remove it. 2. Check the toothed belt for the following defects: cracks, transverse fractures, bundles (belt...
1. Unfasten the latches of the upper casing of the toothed belt and remove it. 2. Check the toothed belt for the following defects: cracks, transverse fractures, bundles (belt...
Replacing the timing belt for 1.4L BCA and BUD petrol engines
VC 1.064. Timing drive for gasoline engines 1.4 l BCA and BUD: 1. Upper part of the toothed belt guard 2. Camshaft pulley screw - Tightening: 20 Nm + 90° - Replace with a new one...
VC 1.064. Timing drive for gasoline engines 1.4 l BCA and BUD: 1. Upper part of the toothed belt guard 2. Camshaft pulley screw - Tightening: 20 Nm + 90° - Replace with a new one...
Replacing the timing belt for the timing drive of gasoline engines 1.6 l BGU, ALL and BCF
VC1.078. Timing drive for gasoline engines 1.6 l BGU, ALL, BCF: 1. Screw: 10 Nm - Apply threadlocker 2. The middle part of the casing of the toothed belt 3. Engine mount bracket...
VC1.078. Timing drive for gasoline engines 1.6 l BGU, ALL, BCF: 1. Screw: 10 Nm - Apply threadlocker 2. The middle part of the casing of the toothed belt 3. Engine mount bracket...
Replacing the timing belt in TDI and SDI diesel engines
VC1.089. Timing drive for diesel engines: 1. Upper part of the toothed belt guard 2. Screw 100 Nm 3. Screw 25 Nm 4. Camshaft sprocket 5. Gear hub 6. Screw 10 Nm - replace 7. Rear...
VC1.089. Timing drive for diesel engines: 1. Upper part of the toothed belt guard 2. Screw 100 Nm 3. Screw 25 Nm 4. Camshaft sprocket 5. Gear hub 6. Screw 10 Nm - replace 7. Rear...
Removal and installation of a gear belt (with motor support mounted remotely)
Removing Attention: risk of fuel leakage! The fuel in the power system is under pressure. Before disconnecting the elements of the system, the connection point must be wrapped...
Removing Attention: risk of fuel leakage! The fuel in the power system is under pressure. Before disconnecting the elements of the system, the connection point must be wrapped...
Replacing spark plugs
Necessary special devices, control and measuring devices, as well as auxiliary means. VC1.126: A. Mounting tool T10029 B. Mounting tool T10112 C. Puller Т40039 D. Puller Т10094...
Necessary special devices, control and measuring devices, as well as auxiliary means. VC1.126: A. Mounting tool T10029 B. Mounting tool T10112 C. Puller Т40039 D. Puller Т10094...
Changing the oil and filter in a 6-speed dual clutch transmission 02E
General provisions Change of oil (bringing it up to normal) and filter is carried out after repair work or as part of an inspection service. There is no other reason to change or...
General provisions Change of oil (bringing it up to normal) and filter is carried out after repair work or as part of an inspection service. There is no other reason to change or...
Headlight adjustment check
Conditions for checking and adjusting: Tire pressure is correct. Lenses must not be dirty or damaged. Reflectors and headlight bulbs must be in good working order. The car must be...
Conditions for checking and adjusting: Tire pressure is correct. Lenses must not be dirty or damaged. Reflectors and headlight bulbs must be in good working order. The car must be...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Similar sections from other manuals for VW cars:
General information: Maintenance Volkswagen Golf 5 (2003-2008)
General information: Maintenance Volkswagen Polo 4 (2001-2009)
General information: Maintenance Volkswagen Sharan 1 (1995-2000)
General information: Maintenance Volkswagen Transporter T3 (1979-1992)
General information: Maintenance Volkswagen Golf 5 (2003-2008)
General information: Maintenance Volkswagen Polo 4 (2001-2009)
General information: Maintenance Volkswagen Sharan 1 (1995-2000)
General information: Maintenance Volkswagen Transporter T3 (1979-1992)
Caddy 3
Beetle
- General information
- User manual
- Daily care
- Maintenance
- Petrol engines 1.4 l
- Engine repair
- Cooling and lubrication system
- Power and exhaust system
- Petrol engines 1.6 l
- Engine repair
- Cooling and lubrication system
- Power and exhaust system
- Diesel engines
- Engine repair
- Cooling and lubrication system
- Power and exhaust system
- Transmission
- Mechanical gearbox 0AH
- Mechanical gearbox 0A4
- Drive shafts
- Chassis
- Car suspension
- Steering
- Brake system
- Body and wiring diagrams
- Interior and exterior
- Electrical circuits
- General information
- Maintenance
- Power unit
- Engine repair
- Cooling and lubrication system
- Supply system
- Exhaust system
- Transmission
- Clutch
- Car gearbox
- Chassis
- Front suspension
- Rear suspension
- Steering
- Brake system
- Wheels and tires
- Body
- Exterior
- Electrical equipment
- Equipment and devices
- Power devices
- Electrical circuits
VWmanual.ru © 2016-2024 | Mobile version | News and articles | Sitemap: EN BG BY UA RS HR RO PL SK HU | Write message | Site search
Passat B2 • Passat B3 • Passat B4 • Passat B5 • Passat B6 • Golf 1, diesel • Golf 1, petrol • Golf 2, petrol • Golf 2 • Golf 3 • Golf 4 • Golf 5 • Polo 3 • Polo 4 • Touareg 1 • Tiguan 1 • Sharan 1 • Transporter T3 • Transporter T4 • Beetle • Caddy 3 •
Passat B2 • Passat B3 • Passat B4 • Passat B5 • Passat B6 • Golf 1, diesel • Golf 1, petrol • Golf 2, petrol • Golf 2 • Golf 3 • Golf 4 • Golf 5 • Polo 3 • Polo 4 • Touareg 1 • Tiguan 1 • Sharan 1 • Transporter T3 • Transporter T4 • Beetle • Caddy 3 •