You can tell from the parts list which part is for the BCA engine and which part is for the BUD.
It can also be seen from the parts list that the cylinder block is supplied complete with «...piston, crankshaft and bearings».
VC2.016. Cylinder block - parts and assemblies:
1. Cylinder block
2. Screw - 50 Nm
- Tightening sequence: top right bolt first, then bottom right bolt, then tighten left bolts (looking in the direction of travel)
3. Screws - M8: 20 Nm + tighten 1/4 turn (90°), M10:45 Nm
4. Oil filter
- Unscrew the hexagon
- Tighten by hand
5. Screw - 13 Nm
6. Oil pan
- Before mounting, clean the seating surfaces
- Install with sealant
7. Oil drain plug 30 Nm
- With fixed lip seal
- When installing, replace with a new one
8. Bracket for tensioners, alternator and air conditioning compressor
9. V-ribbed belt tensioner
Visitor comments