Lubrication system — design description The lubrication system consists of an oil pan, an oil pump, an oil filter and channels supplying oil under pressure to friction pairs. List of parts of the lubrication system with...
Oil filter with heat exchanger — design description List of parts of the lubrication system with technological notes on repair to Figure VC2.194: 1. O-ring: - move up to the shoulder; - Applies to BGU engines only. 2. Connecting...
Removed and installed oil pan Removing 1. Remove the acoustic cover. 2. Drain engine oil. 3. Remove the fixing screws securing the oil pan to the gearbox. 4. Disconnect the 3-pin connector of the oil level and...
Removal and installation of the oil pump Removing 1. Remove the oil pan and oil damper. 2. Remove the screw (2). 3. Remove the sprocket from the oil pump drive shaft. 4. Remove the screws (1) And (3) and remove the oil...
Draining and refilling coolant 1. Open the cover of the expansion tank of the cooling system. 2. Remove the acoustic cover. 3. Open drain valve (arrow) on the radiator, if necessary, install an auxiliary hose...
Removal and installation of the pump of a cooling liquid Removing 1. Drain the coolant. 2. Remove poly V-belt. 3. Remove the shield (2). 4. Remove tensioner (1) poly V-belt. 5. Remove the top part of the timing case. 6. Loosen the...