Fuel system 1.6 l petrol engine Volkswagen Caddy 3

Air supply and fuel injection system
8 of these engines use SIMOS 3.3 and SIMOS 7.1 injection systems manufactured by SIEMENS. These systems are multi-point systems with fully electronically controlled fuel delivery...

Parts and assemblies of the air supply system of BGU, BSE, BSF engines
Specification for parts and assemblies of the air supply system of BGU, BSE, BSF engines. Throttle block. vacuum system. Air intake system. Exhaust gas recirculation. Figure...

Details of the fuel manifold with injectors of engines 1.4 and 1.6 l
Specification of components and parts of an assembly unit «Fuel manifold with injectors» for engines 1.4 l BCA, BUD and 1.6 l BGU, BSE, BSF to drawing VC 2.208 Pos. Detail number...

Parts and components of the air supply and filtration system
List of parts and assemblies with notes on installation work to Figure VC2.209: 1. Air intake screw: 5 Nm. 2. Air duct-to the front bumper. 3. Diffuser. 4. Creeper. 5. Screw...

Removal and installation of the lower part of the intake manifold (BGU)
Removing 1. Remove the engine cover. 2. Disconnect connector (1) from the secondary air pump motor. 3. Disconnect air hoses (2) And (3) from the secondary air pump motor. 4....

Removal and installation of the lower part of the intake manifold (BSE, BSF)
Removing 1. Remove the engine cover. 2. Disconnect connector (1) from the secondary air pump motor. 3. Disconnect air hoses (2) And (3) from the secondary air pump motor. 4....

Removing and installing injectors
Removing 1. Remove the lower part of the intake manifold. 2. Disconnect the fuel line (2), collecting escaping fuel with a rag. To unlock and remove the line, squeeze the...

Switching in the control system to check the parameters of the injection system
Switches for checking the tightness of the injectors (supply pressure to the injectors without turning on the ignition) BGU engines Remove fuse SB 33 located in slot F 33 of the...

Details and knots of a reception pipe with the catalyst
List of parts and assemblies of the exhaust pipe with a catalyst with technological notes on repair to drawing VC2.226: 1. Exhaust manifold. 2. Nut for fastening the exhaust...

Details and assemblies of the additional and main mufflers
List of parts and assemblies of the additional and main mufflers with technological notes on repair to figure VC2.227: 1. Additional muffler: - it is made as a whole with the main...

Exhaust gas recirculation system (BGU)
For all types of engines (meeting various toxicity standards) all components installed (e.g. EGR valve). However, not all implementations use and control all of these components....

Secondary air supply system (BGU, BSE)
Description of work The secondary air supply system is switched on for a short time when starting a cold engine and pumps atmospheric air into the exhaust tract. This enriches the...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Caddy 3 Beetle