Instructions: The illustrations show the right side of the vehicle. For the left side, the work is done in a similar way. Loose hinge bolts must always be replaced with new ones. After replacing the hinge, it must be lubricated.
- 1 - Door
- 2 - Door hinge, the upper part of the hinge is connected to the lower part with a bolt -4-, the hinge consists of two parts
- 3 - Bolt, 32 Nm, always replace removed bolts with new ones
- 4 - Bolt, this bolt must be unscrewed to remove the door from the hinge, 30 Nm
- 5 - Door hinge, the lower part of the hinge is connected to the upper one with a bolt -4-, the hinge consists of two parts
- 6 - Bolt, screwed in from the inside of the vehicle, 32 Nm, after replacing the A-pillar, other tightening torques must be applied, always replace the removed bolts with new ones
- 7 - Bolt, 32 Nm, after replacing the A-pillar, other tightening torques must be applied, always replace the removed bolts with new ones
- 8 - Bolt, 32 Nm
- 9 - Door opening limiter
- 10 - Bolt, 32 Nm
- 11 - Bolt, removing the bolt on the driver's side, to carry out this operation on the front passenger side, remove the glove box, 32 Nm. After replacing the A-pillar, other tightening torques must be applied, always replace the removed bolts with new ones
- 12 - Door hinge, the lower part of the hinge is connected to the upper one with a bolt -13-, the hinge consists of two parts
- 13 - Bolt, this bolt must be unscrewed to remove the door from the hinge, 30 Nm
- 14 - Door hinge, the upper part of the hinge is connected to the lower part with a bolt -13-, the hinge consists of two parts
- 15 - Bolt, 32 Nm, always replace removed bolts with new ones
- 16 - Bolt, 32 Nm, after replacing the A-pillar, other tightening torques must be applied, always replace the removed bolts with new ones
Lubrication of new door hinges
Instruction: The description is made for the right side of the car. The left side is similar to the right.
A new loop is lubricated after painting. Lubricate the upper hinge -1- around the circles -arrows- of the pin and bore with lithium grease -G 000 150-. Lubricate the lower hinge -1- around the circles -arrows- of the pin and bore with lithium grease -G 000 150-.
Visitor comments