Sunblind motor initialization

The ignition is on. Press the sunshade close button -3- and hold it in this position during the entire initialization process (about 20 s). During initialization, the blind first closes and then moves back about 200 mm. After the shutter is completely closed again, the key can be released - initialization is completed.

• 1 - Outer seal
• 2 - Rear glass section
• 3 - Front glass section
• 4 - Frame
• 5 - Sunblind
• 6 - Sun blind motor
• 7 - Sliding sunroof motor
• 8 - Section lifting mechanism
• 9 - Fairing