Hood release lever

• 1 - Support bracket
• 2 - Hood release lever
• 3 - Retaining ring
• 4 - Bolt, 2 pcs., 1.5 Nm
• 5 - Cable, fixed on the support bracket
• 6 - Bracket
• 7 - Nuts, 2 pcs.

Removal and installation of the hood opening lever

Pull the lever -1 - and open the hood. Insert a small screwdriver into the gap between the lever -1- and the circlip -2-. Push out circlip -3- and remove lever -1-.

Installation

Insert retaining ring -2- inside lever -1-. Install the lever -1- and, by pushing, fix it on the support bracket. Before closing the hood, check the operation of the drive lever and cable.