Instructions: Below is a description of the removal and installation of the outer right door handle. The outer handle of the left door is removed and installed in the same way. The handle rests on the surface of the door. When removing the door handle, the mating part of the body moves inward. When installed, thanks to the bevel on the handle, it will automatically fall into place.
Remove the cover and lock cylinder from the driver's door. Remove the cover from the front passenger side. Slightly pull handle -2- back -arrow a- out of counter housing. Turn the knob in the direction -arrow b-. Hold the handle at a right angle to the door and remove it -arrow c- from the housing -1-.
Installation
Instruction: The handle is adjacent to the surface of the door. When removing the door handle, the mating part of the body moves inward. When installed, thanks to the bevel on the handle, it will automatically fall into place.
Insert door handle -1- at a right angle -arrow a- into housing -2-. Turn knob -1- in direction of -arrow b-. Slide the handle forward -arrow c- into the mating part on the housing. Install the larva and cover. Finally, with the door open, you need to check the operation of the lock.
Visitor comments