Removing and installing the handle housing

Removing

Remove carrier panel. Press lock -arrow a- on handle housing -5- downwards. Slide handle housing -1- in direction of -arrow b- until fasteners -6- in bracket guide -2- are fully visible.

Remove the handle housing from the bracket. Remove cable -1- from guide in handle housing -2-. Turn cable -1- in direction of -arrow- and remove end piece -3- from eye.

Installation

Attach cable end -3 to eyelet and turn cable towards housing -1- in opposite direction -arrow-. Attach cable -1- to guide on handle housing -2-. Insert fasteners -6- of handle housing -1- into bracket guides -5-. Slide the handle housing into the bracket until the fasteners are engaged -arrow a-,