Instruction: The consideration is carried out on the example of the right side, for the left side the work is performed in a similar way.
- 1 - Door glass
- 2 - Molding, inserted into the glass guide
- 3 - Retainer for fixing the molding on the glass guide
- 4 - Guide, put on the flanging, version with and without molding
- 5 - Overlay
- 6 - Bolt, 3 pcs., 2 Nm
- 7 - Plate nut, 3 pcs.
- 8 - External glass seal, put on the flanging
- 9 - Internal glass seal, put on the flanging, version with and without molding
- 10 - Door lock bolt, 2 pcs., 20 Nm
- 11 - Bolts (with left hand thread), 2 pcs., 8 Nm
- 12 - Lid, 2 pcs.
- 13 - Bolt, 10 pcs., 8 Nm
- 14 - Power window motor
- 15 - Connector on pillar A
- 16 - Carrier panel, the power window is part of the carrier panel, the window motor is screwed to the carrier panel from the front
- 17 - Window regulator, is part of the carrier panel
Removing
Instructions: Below is a description of the work on removing and installing the glass of the right door. The glass of the left door is removed and installed in the same way. The bolts -3- have a left-hand thread.
Remove the front door trim. Remove plugs -2-. Lower the door glass until the tie bolts -3- are accessible through the mounting holes. Loosen bolts -3- (do not unscrew completely, note that they have a left-hand thread) and release the clamps.
Instruction: If this is not possible due to a malfunction of the power window regulator -5-, then you can unscrew the fastening screws, remove the window regulator motor -6- and then lower the window.
Raise door window -1- at rear -arrow- and pull forward out of door.
Installation
Insert glass -1- in the door in the direction of -arrow-. Check that the glass is correctly inserted into the guide -2-.
Insert glass -arrow- without pressure into clamping jaws. Move glass -1- to window frame -2- -arrow b-.
Tighten bolts -3- (2 pcs. with left hand thread) moment: 8 Nm.
Instruction: Bolts -3- have a left-hand thread.
Then follow the steps for removing the glass in reverse order. Before installing the door upholstery, check the operation of the power window.
Visitor comments