- 1 - Casing
- 2 - Support bracket
- 3 - Stabilizer link, connects stabilizer to trailing arm/wheel bearing housing
- 4 - Bolt, 90 Nm and tighten by 45°, tighten in the correct sequence, replace after each removal
- 5 - Trailing arm
- 6 - Suitable shaft
- 7 - Allen screw, M14x1.5x45, 70 Nm and tighten by 90°, replace after each removal
- 8 - Wheel bearing housing
- 9 - Rear right speed sender -G44- / rear left speed sender -G46-, before installing speed sender, clean hole and apply some grease -G 000 650-
- 10 - Hex socket bolt, M6x16, 8 Nm
- 11 - Silent block
- 12 - Nut, M12x25, 40 Nm, self-locking, replace after each removal
- 13-brake disc
- 14 - Bolt, 4 Nm
- 15 - Bolt, 70 Nm and tighten by 90°, replace after each removal
- 16 - Wheel hub with bearing (bearing assembly), the magnetic ring for the operation of the ABS sensor is built into the wheel hub. The hub and wheel bearing are combined in a single housing (bearing assembly). The bearing assembly does not require adjustment and maintenance. Adjustments and repairs are not possible!
- 17 - Bolt, M6x12, 12 Nm
- 18 - Shield
- 19 - Bolt, M12x1.5x80, 90 Nm and tighten by 90°, replace after each removal
- 20 - Silent block
- 21 - Bolt, M10x35, 50 Nm and tighten by 45°, replace after each removal
Visitor comments