- 1 - Eccentric bolt for camber adjustment, after loosening check wheel alignment
- 2 - Nut, M12x1.5, 95 Nm, self-locking, replace after each removal, tighten only in the position corresponding to the curb weight
- 3 - Eccentric washer, the hole has a ledge
- 4 - Eccentric bolt for adjusting the toe, after loosening, check the wheel alignment
- 5 - Eccentric washer, the hole has a ledge
- 6 - Nut, M12x1.5, 95 Nm, self-locking, replace after each removal, tighten only in the position corresponding to the curb weight
- 7 - Subframe
- 8 - Bracket for rear muffler
- 9 - Bolt, M12x1.5x110, 90 Nm and tighten by 90°, replace after each removal
- 10 - Lower transverse arm
- 11 - Nut, M12x 1.5x75, 90 Nm and tighten by 90°, self-locking, replace after each removal, tighten only in the position corresponding to the curb weight
- 12 - Bolt, replace after each removal
- 13 - Threaded rivet, M6
- 14 - Spacer piston
- 15 - Shield protecting against stone strikes
- 16 - Hexagon bolt, M6x12, 8 Nm
- 17- Nut, self-locking, replace after each removal
- 18 - Washer
- 19 - Bolt, M14x1.5x115, 130 Nm and tighten by 90°, replace after each removal, tighten only in the position corresponding to the curb weight
- 20 - Washer
- 21 - Upper wishbone
- 22 - Washer
- 23 - Nut, self-locking, replace after each removal, tighten only in the position corresponding to the curb weight
- 24 - Wheel bearing housing
- 25 - Washer
- 26 - Bolt, M14x1.5x115, 130 Nm and tighten by 90°, replace after each removal, tighten only in the position corresponding to the curb weight
- 27 - Tie rod, convex side in direction of travel
- 28 - Bolt, M12x1.5x95, 90 Nm and tighten by 90°, replace after each removal
- 29 - Bolt, M12x1.5x90, replace after each removal, tighten only in the position corresponding to the curb weight
- 30 - Nut, 90 Nm and tighten by 90°, self-locking, replace after each removal, tighten only in the position corresponding to the curb weight
Visitor comments