- 1 - Cardan joint
- 2 - Bolt, M8x35, 30 Nm, replace after each removal
- 3 - Power steering with power steering control unit -J500-, with electromechanical power steering motor -V187-, with crankshaft speed sender -G23-, with steering moment sender -G269-, can be checked in slave mode Troubleshooting with tester -VAS 5051B-
- 4 - Swivel fist
- 5 - Nut, M12x1.5, 50 Nm, self-locking, replace after each removal
- 6 - Subframe
- 7-Bolt, M10x70, 50 Nm and tighten by 90°, replace after each removal
- 8 - Heat shield
- 9 - Torx screw, 6 Nm, self-tapping
- 10 - Wiring harness
Visitor comments