Note: From calendar week 22, 2008, on vehicles with Climatronic, a bracket with an air quality sensor -G23B- is installed on the intake grille.
Unlock the air quality sensor -G238- -1- and remove it from the bracket by turning it clockwise.
Loosen nuts -arrows- (2.5±0.4 Nm) and remove the inlet ventilation grill upwards.
Installation is carried out in the reverse order.
Instructions: Make sure that the grate seal is installed correctly.
Installation order. Properly orient the inlet ventilation grille with respect to the edges of the opening. Holding the grate, fix it first with the side nuts (2.5±0.4 Nm) and only then the middle nut.
Visitor comments