Checking the level and topping up the oil of the hydraulic system of the switchable stabilizers

Switch on the hydraulic system with the help in non-pressure mode.

Remove the rear left lamp.

Remove the plug from the filler hole (pic. 4.63).



Cut off the tip of the atomizer (pic. 4.64).



Mark dimension X. X = 135 mm.

Insert the spray tube up to the marked mark into the filler hole (pic. 4.65).



Fill in oil for the central hydraulic system and power steering G 002 000 until the tube begins to suck oil with a plastic bottle.

After that, use a plastic bottle to pump out the oil from the tank until the tube begins to suck in air. At the same time, follow the label on the tube.