Car cooling system Volkswagen Touareg 1

Removal and installation of elements of the cooling system (petrol engine.)
WARNING: When opening the expansion tank, hot steam may come out. to avoid eye injury and scalding, wear protective goggles and protective clothing. Cover the bull's lid with a...

Draining and filling the coolant (petrol engine.)
WARNING: When opening the expansion tank, hot steam may come out. to avoid eye injury and scalding, wear protective goggles and protective clothing. Cover the bull's lid with a...

Removal and installation of a radiator (petrol engine.)
Removing Drain the coolant. Disconnect the mounting bracket on the quick coupling of the upper and lower coolant supply hoses and disconnect the hoses from the radiator. Remove...

Removal and installation of the water pump (petrol engine.)
Removing Drain the coolant. Remove poly V-belt. NOTE: The belt pulley does not need to be removed to remove the water pump. Unscrew the water pump mounting bolts through the holes...

Pressure testing of the cooling system (petrol engine.)
Screw the cooling system tester VAG 1274 with adapter VAG 1274/8 onto the expansion tank, as shown in Figure 2.238. Operate the pump and create a pressure of 1.4-1.6 bar. Check...

Cooling system (diesel engines)
Pic. 2.240. Body-mounted cooling system components: 1 - cover; 2 - expansion cans; 3 - tee; 4 - coolant hose; 5 - holder; 6 - radiator. Installation location of the coolant...

Draining and filling the coolant (diesel engine.)
Drain WARNING: When opening the expansion tank, hot steam may come out. Wear protective goggles and clothing to prevent eye injury and scalding. Cover the tank lid with a rag and...

Removing and installing the fan mount (diesel engine.)
Removing Drain the coolant. Remove the fixing bracket of the upper coolant hose, unscrew the bolt 1 (pic. 2.245). Remove the upper coolant hoses from the radiator. Remove the...

Crushing and installing a radiator (diesel engine.)
Removing Remove the fan mount. Remove the bumper bracket mounting brackets. Remove the A/C condenser and ATF cooler mounting brackets. Unscrew the upper mounting bolts of the...

Removal and installation of fittings of the cooling system (diesel engine.)
Removing Drain the coolant. Remove the cooling system hoses from the fittings. Disconnect the connector from the coolant temperature sender G62. Unscrew the fixing bolts of the...

Removal and installation of the water pump (diesel engine.)
Removing Remove the front bumper. Bring the radiator frame to the service position. Set the crankshaft to the dead center position of the first cylinder, check the valve timing....

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian