Conditions
The fuel tank must be empty.
Fuses 13 and 14 must be removed from their sockets.
Work order
Cut the carpet to the left from point A to point B at the pre-cut location (pic. 2.308).
Unscrew the nuts 1 fastening the cover (pic. 2.309).
If necessary, unscrew the fastening of the armrest support 2 or the support bracket.
Unscrew the retaining ring using the key T10202 from the left flange of the sensor.
Remove the flange on the left side of the fuel tank.
Remove fuel from fuel filter housing.
Mark the mounting position of the filter cover 2 with a colored pencil.
Disconnect the ground wire 1 and unscrew the filter cover (pic. 2.310) from the body.
When replacing the filter insert, do not bend the ground connection leads and check that they are sufficiently tight.
Visitor comments