NOTE: For installation work, the engine must be secured to the K4S 6095 engine and gearbox fixture.
NOTE: The oil level must not exceed the Max mark - risk of catalytic converter damage.
If a large amount of metal chips or wear marks are found in the engine during repair, this may be due to damage to the crankshaft bearing and connecting rod, in order to avoid subsequent damage, after repair, the following must be done.
Thoroughly clean the lubrication channels.
Replace the oil drain check valve.
Replace oil injection nozzles.
Replace oil cooler.
Replace oil filter.
The amount of oil to be filled in: with an oil filter 6.3 liters.
Engine oil specification: use engine oils «LongLife» according to VW 503 00.
NOTE: The engine is filled with engine oil according to VW 503 00 at the factory.
Engine oils according to VW 500 00 and 501 01 and 502 00 can be used in the future. These oils must be changed every 12 months or 15,000 km.
You can use engine oil to change or top up «ILSAC GF3 with viscosity grade SAE5W-40». The service life indicator must be programmed accordingly.
Visitor comments