Dismantling
Remove door trim see above, lower the window a little.
(57-129) unscrew the glass from the windshield (arrows).
Unscrew the drive strip at the top from the window frame and from the inner door skin.
Pull the bar down.
Pull the corner glass out to the side.
Pull the window glass up.
Installation
Insert the window glass into the door from above.
Insert corner glass. Glue seal overlap areas to window frame and window seal.
Insert the leading bar from below.
Hold the bar and at the same time insert the window glass from above into the window frame.
Fasten the guide bar with bolts.
(57-130) screw the window glass slightly to the power window (arrows).
Raise the glass with the handle to the very top so that it is aligned with the window frame and seal.
Slightly lower the glass and through the mounting holes (see picture) fasten firmly to the windshield.
Install door trim see above.
Visitor comments