(1) window handle. 1 countersunk screw
(2) door knob. 4 screws
(3) inner door latch
(4) door latch socket. 1 screw
(5) armrest. 2 screws
(6) expansion nuts for fastening the door handle. Mounting: insert from the inside
(7) expansion nuts for attaching the armrest. Installation: insert from the side of the gap between the outer and inner sheet to the inside
Dismantling
(74-768) remove the plastic cap from the power window handle, unscrew the screw under it.
Remove two caps from the door handle with a screwdriver, unscrew the screws.
(without a number) open the armrest.
Remove the door trim with a wide screwdriver.
Carefully peel off the PVC seal.
Installation
Glue the PVC seal.
Install door trim.
Put on the power window handle, place the socket and secure with a screw. Screw on the window handle cover.
Install the socket for the remote control of the door lock and fix it with the screw. Install the cap.
Fasten the armrest with two screws.
Fasten the door handle with four screws, put on the cap.
Visitor comments