Dismantling
Raise the rear of the car.
Place a jack under the wheel and raise slightly.
Unscrew the shock absorber from the guide rod at the bottom and from the structure at the top.
Installation
Check shock absorber, see "Shock absorber check".
Check rubber mount and steel bushing in shock absorber, press out and renew if necessary.
Install the shock absorber and screw it to the structure at the top with a torque of 90 Nm.
Insert the shock absorber from below into the guide rod, if necessary, raise or lower the wheel slightly, tighten the bolts with a torque of 90 Nm.
Visitor comments