Headlight Bulb Replacement The lighting installation includes the main headlight, fog lights, taillight, brake light, rear light, license plate light, direction indicators, interior lighting and instrument...
Parking light bulb replacement Dismantling Disassemble the headlight, see below. Turn the bulb holder slightly to the left and pull it out of the reflector. Turn the defective lamp slightly to the left and pull...
Headlight adjustment This adjustment is of great importance for traffic safety. Precise setting of the headlight is possible only with the use of a special adjustment device. Therefore, only those...
Dismantling and installation of the interior lighting lamp The lamp is held by a stop and a clamping spring in the cutout of the upper crossbar. Dismantling Disconnect battery from ground. (B25-062) Use a screwdriver to carefully press...
Dismantling and installation of the front direction indicator Dismantling Unscrew the screws from the insert. Remove flashlight. (B25-130) remove the rubber cap. Pull the insert out of the case. Turn the lamp slightly to the left and pull it...
Dismantling and installation of a license plate light license plate lights are inserted into the trim at the back. To replace the lamp, you need to pull the case back completely. Unscrew the glass, push the lamp into the socket, turn...
Dismantling and installation of the rear light (1) lampholder (2) turn signal lamp (3) stop lamp (4) rear light lamp (5) rear fog lamp (6) rear lamp (7) pad (may not be performance dependent) Attention: When retrofitting rear...
Dismantling and installation of the headlight (1) headlight insert (2) setting ring (3) headlight height and direction adjustment (4) clamping ring. Only for 12V 45/40W lamp (5) protective cap (6) bearing ring (7)...
List of used lamps In order to be able to replace any lamp at any time, you need to constantly carry spare lamps with you. The list of lamps used in bus 8 is given below: Farah (ordinary) 12V 45/40W...