Attention! In models up to 3.85, the cooler pipes are partly made of steel. When rusting, they must be noticed in the workshop for plastic ones.
(1) cooling pump.
(2) preheat sensor.
(3) coolant temperature indicator sensor.
(4) to the heat exchanger.
(5) capping.
(6) from the heat exchanger.
(7) to the radiator.
(8) surge tank.
(9) to the filling tank.
(10) from the radiator.
(11) oil filter.
(12) cooler regulator.
c13) adjusting washers for adjusting the tension of the V-belt.
(14) to surge tank.
(15) refill tank.
(16) cooling pump V-belt. Check the tension by hand, the deflection should be 5-10 mm.
Visitor comments