- without changing the oil filter - 4.0 liters
- with oil filter change - 4.5 liters
1. oil cooler. Surfaces in contact with the oil filter holder, except for the O-ring, should be smeared with sealing agent AMV-188 100.02. Pay attention to the free location in relation to nearby nodes.
2. rod oil level indicator from 8.82.
3. oil pressure regulator 0.3 bar, 25 Nm.
4. Oil pressure regulator 1.4 bar diesel, 0.9 bar turbo diesel.
5. mesh, clean.
6. gears. Check lateral and axial clearance. The gear width for a diesel engine is 26 mm, for a turbo diesel engine it is 30 mm.
7. oil filter. Follow the instructions on it.
8. rod oil level indicator up to 7.82.
9. oil filling up to 7.82.
10. oil filler from 8.82.
11. oil bath.
12. guide sheet.
13. suction filter. Removed with a screwdriver.
14. oil bath gasket.
15. screw plug. To drain the oil, unscrew about 3 turns.
Visitor comments