Purpose of engine oil In operation, engine oil is exposed to a wide variety of influences. Therefore, it is very difficult to accurately determine the effect of various operating influences on an...
Engine oil change An oil change on engines of manufacture up to 9.85 is carried out every 7500 km, on engines of manufacture from 10.85 every 10,000 km or once a year with a lower annual mileage....
Oil filter replacement The oil filter should be changed every 15,000 km. A special tool is used to remove the oil filter at service stations. If not, you can use a leather belt. You can also drive a...
Oil pump, oil filter and pressure reducing valve The opposed cylinder engine has a circulating lubrication system with a gear pump, oil filter, oil pickup screen and pressure reducing valve. The gear pump is directly connected...
Removal and installation of the oil reducing valve In case of malfunctions in the lubrication system, the oil pressure reducing valve should be checked, as the valve piston may be stuck at the upper or lower extreme point. When...
Automatic oil pressure control Only vehicles manufactured from 8.85 Since August 85, the VW bus has been equipped with a dynamic oil pressure control system. This means that the control is carried out...
Oil switch test, oil pressure test Only vehicles manufactured from 8.85 The 0.3 bar oil switch is identified by the brown insulation. It is located in the place of the former oil switch between the protective tubes...
Removal and installation of the oil pump Removing Removing the oil pump is possible without removing the engine. Drain engine oil. Remove muffler cover. Support the engine with a mobile garage jack with a wide wooden...