Car gearbox repair Volkswagen Transporter T3 1979-1992

General description of the gearbox
The gearbox forms one unit with the final drive. The whole unit can be removed both after dismantling the engine, and separately (the engine stays in the car). Removing the...

Dismantling and installation of transmission
If it is necessary to dismantle the transmission, it is recommended to remove only it. If a lifting platform is not available, then it is enough to raise the rear of the vehicle...

All-wheel drive system
bus model "synchro" equipped with all-wheel drive. In order to drive the front wheels as well, the following components are needed: a differential gear and two drive shafts for...

Gear shifting — design description
Drawing 34-1297 on the next page shows a 4 speed gearbox. (1) gear knob head (2) gear shifter (3) protective cover (4) sleeve (5) locking screw M5x8 (6) pressure spring (7) gear...

Installing the gearshift mechanism
Set the gear to idle. (34-1281) cars up to 5.88: the holes of the compensating support and the bearing of the gear lever, shown by the arrows, must be on top of each other....

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Car gearbox VW Transporter T3