Fitting tailgate 1. The door must be adjusted if it does not fit correctly in the body, or after installing a new one. 2. Adjustment is made by loosening the hinge screws and moving the door. The...
Front door device Front door device 1. Front door; 2. Inner window seal; 3. Outer window seal; 4. Guide windows; 5. Door window glass; 6. Lifting tire; 7. External door handle; 8. Screw, 8 Nm; 9....
Removal, installation and adjustment of the front door Door fixing 1. Nut; 2. Hex screws Removing 1. Unscrew the nut (1) and remove your finger. 2. Unscrew hex screws (2) from the upper and lower hinge and remove the door. If the door...
Front door lining Front door trim 1. Front door; 2. Lock washer; 3. Seal; 4. Noise absorber; 5. Blind rivet nut; 6. Sheathing; 7. Handle; 8. Screw; 9. Lid; 10. Locking button; 11. Socket; 12. Clip;...
Door glass — removal and installation Removing 1. Remove door trim. 2. Install the window handle on the axis and lower the glass all the way down. 3. Unscrew the glass from the power window by loosening the screws...
Window regulator — removal and installation Removing 1. Remove door trim. 2. Lower the glass down by turning the handle and unscrew from the power window. 3. Raise the glass by hand all the way up and secure it in this...
Handle and door lock — removal and installation Attention! If the lock is removed, the outer door handle must first be removed. Removing 1. Remove door trim. 2. Unscrew the screws (1) and remove the door handle in the direction...
Door seal — removal and installation Removing 1. Remove the inner lining adjacent to the door seal. 2. To get to the upper B-pillar trim screw (B-pillar: 2nd roof-pillar counted from the front, door wedge support),...
Removal and installation of a sliding door Removing 1. Unscrew cross screw (1) and remove the closing piece (2) from the guide bar (on the outside of the body). 2. unscrew the screw (2) on the inside of the sliding door...