Brake pedal with support and brake light switch
1. Brake pedal; 2. Stoplight switch
The brake light switch is located on the brake pedal support. To check the brake light switch, see subsection 10.7.
Replacement and adjustment
1. Disconnect plug from brake light switch.
2. Turn the brake light switch (2) at 90° (1/4 turn) to the left and pull out.
3. Before installing the switch, remove the pusher from the switch to the end.
4. Install switch and secure by turning 90°to the right. The switch will adjust itself automatically.
5. Connect plug.
Visitor comments