General steering information Steering consists of a steering wheel, steering column, steering racks, tie rods and power steering (5 cylinder engine). The steering wheel is fixed on top of the steering column,...
Steering wheel — removal and installation Removing 1. Remove the protective cover by hand. 2. Disconnect the electrical wiring from the protective cover. 3. Turn the steering wheel and set the wheels straight ahead. 4....
Ball joint and tie rod — removal and installation Removing 1. Unscrew the ball joint nut. 2. Press out the tie rod joint pin using a commercially available press (A) from the tie rod lever. 3. Loosen the ball joint from the tie...
Checking the tightness of the control system If there is no oil in the expansion tank, it is necessary to carefully check the tightness of the system. 1. Start the engine and leave it to idle. 2. Turn the steering wheel...
Bleeding air from the control system Power steering pump 1. Screw, 35 Nm; 2. Screw, 29 Nm; 3. V-belt; 4. Tension roller; 5. V-belt pulley; 6. Remote sleeve; 7. Screw, 40 Nm; 8. Bracket; 9. Return pipeline; 10. Intake...
The main parameters of the chassis adjustment Optimum driving performance and minimum tire wear are only achieved if the wheel alignment is perfect. In case of abnormal tire wear and insufficient road stability (with poor...