Removing
1. Unscrew the air grille screws on the hood cover, fold the grille forward.
2. Press the jet stopper to the side with a screwdriver and remove the jet.
3. Disconnect the fluid supply hose from the jet.
Installation
1. Insert the jet from above until it clicks.
2. Attach the fluid supply hose.
3. Install grate and screw.
Adjustment
1. Adjusting dimensions for glass flushing: a = 160 mm, b = 320 mm, c = 400 mm.
2. Rear window: with double doors: a = 150 mm, b = 250 mm. With wide (ordinary) trunk lid: the jet jet is directed to the middle of the washed surface.
3. The direction of the jet jet can be adjusted if necessary with a knitting needle (needle).
Visitor comments