Working principle of diesel engine Diesel engine power system 1. Fuel filter - do not mix up the connections. The direction of the section is marked with arrows; 2. Ring; 3. Regulating valve; 4. Fuel return line...
Fuel filter heating system In order to maintain fluidity at low outside temperatures, the fuel is heated. This is carried out by an increased supply of fuel, which is again drained through the high-pressure...
Checking and adjusting idling and speed limits Terminal for connecting a tachometer W - terminal for connecting a tachometer Checking and adjusting the speed of a 4-cylinder engine 1. Screw for adjusting idle speed; 2. Screw...
Sealing of connecting fittings of injection pump Removal of pipelines 1. Clean the injection lines at the injection pump fittings with a cold cleaner. 2. Unscrew the cap nuts with an open spanner, e.g. HAZET 4560. Attention! Do...
Nozzles — removal, inspection and installation Faulty injectors can cause severe engine knocking, much like the noise of failed main bearings. In case of such a malfunction, let the engine idle and unscrew the union nuts of...
Checking the start of injection pump supply The start of feed can be checked on the installed and removed engine. To check, a watch micrometer is required with the appropriate adapter for screwing into the pump. Piston...
Operation of machines equipped with a catalyst VW T4 petrol engines are fitted with catalytic converters as standard. Catalyst requires engine to run exclusively on unleaded gasoline (lead free). The fuel injection system...
Turbocharging system — design description Exhaust system and turbocharging 1. Connecting tube - with a plug for checking the boost pressure; 2. Gasket - coating (thickening) points to the intake pipe; 3. Inlet pipe - with...